looking good dude cant wait for you to crash it hee hee;D;D;D;D;D;D

fincan below ready to be inserted into the main airframe

 
 

main airframe have cut the fin slots to the end of the tube


 

test fit of fin can in the airframe
 


 

Man thats going to be one beast of a rocket.

comn along nice

stop being lazy dude and finish that rocket mush mush

Did you get this off Performance Rocketry or another dealer ?

Quoted from SARocketMan

Did you get this off Performance Rocketry or another dealer ?

 
got it from wildman nice and fast

did some work on the Ebay sled today sanded the edge of the G10 sled so the epoxy will bond better


 
epoxy layed on then on with the tubes and some clamps to hold it in place while drying
 

 
then i coated the tubes with epoxy took the classine layer of so the epoxy will soak in and added some nice fillets to the tubes

I glassed mine as well that helped with strength.

she is on there hard
 
glued the end of the electronics bay together once again the clamps came in handy

finshed product just have to add the ejection ports


 

the rear will be recessed into the electronices bay rather than sit flush like the other side will post apic when it is done

did a bit more today after mowing the lawn
 
i glued the spacer on the electronics bay using 5 min epoxy this will also be where the arming keys will be placed
this is the spacer cut from a piece of leftover from the shipping it was used to proctect the nosecone


making in artliner where the spacer goes


bay spacer glued on